---

Easier access to messages
Pulsing amplifier tuner
A/B Mic Switch

i-Mate Product Description:

I-Mate implements the external selection of pre-recorded voice and keyed message for the IC-7800, IC-756 PROII/III and keyed CW messages for the IC-746 PRO. It eliminates the necessity for shifting the display from an operating mode to a memory select mode simply to transmit the pre-recorded message. Pressing one of four buttons on the I-Mate transmits the message associated with that button.

In addition, the I-Mate provides a pulsed sine-wave oscillator for the tuning of high powered amplifiers and antenna tuners.

An alternate audio input is provided that can be used for a microphone such as one of the Heil Pro-set series.

The I-Mate plugs directly into the transceiver's microphone jack and receives its power from the transceiver.

• Works with CW and voice (CW only with the Icom 746 Pro).
• Send memories in the Icom 756 ProII while keeping the spectrum scope on the display.
• Easier access to memories, less hand movement.
• Heil Pro-Set plugs directly into the i-Mate without the Heil adaptor.
• A separate PTT switch is provided to key the transceiver for digital modes.
• Auxiliary input can be used for digital modes.
• A switch (MIC 1) is provided for switching between the standard 8 pin mic connector and auxiliary input (MIC 2).
• "Tune" button is a pulsed oscillator (about 30 wpm) for tuning. Save finals in the amplifier, 50% duty cycle while tuning.
• The level of the pulsed oscillator can be adjusted with a small screwdriver.

  i-Mate Product Manual